INTRODUCTION TO THE GRAPHICAL USER INTERFACE
1-18
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Setup and status information
The following system setup and status information is displayed in the
right column of the IPS main window:
Control Unit Configuration section
Displays the current configuration of the system. Items that appear
here include:
Figure 1-17.
Control Unit Configuration section of main window
•
MICR Mode
— (96/4635/180 MICR IPS only) Displays the
current MICR mode setting (on or off). This item does not
appear on non-MICR IPS.
•
Resolution
— Shows the resolution in dpi of the fonts used in
the current or most recent job sent to the IPS. This field reflects
the value entered on the Resolution window, accessible through
the Configuration pull-down menu.
•
Rotation
— Indicates whether Continuous Forms Emulation is
enabled.
•
Privilege Mode
— Indicates the current Privilege Mode
(Service, Administrator, Operator, or User).
Note:
When a remote Shell is activated, “Remote Shell Active”
displays on the window.
When a remote Shell is activated and a service representative dials
in remotely, “Remote Session Active” displays on the window.
For information on activating a remote shell, refer to the “Setting up
the printer controller” chapter, “Enabling or disabling the modem”
section.
