SETTING THE SYSTEM CONFIGURATION
4-58
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Adding a DFA profile
The values you enter for a DFA profile are provided by the vendor of
your finishing equipment, except the Set Media Modification (SMM)
values for Finishing Functions 1 and 2 (if used). The SMM values are
specified in the job by your applications programmer.
To create a new DFA profile:
1. Locate the DFA Profile pull-down menu on the IPS main window
(below the Output Configuration pull-down menu).
Figure 4-46.
DFA Profile pull-down menu
Note:
The DFA Profile menu displays only if you have DFA
enabled on your IPS.
2. From the DFA Profile pull-down menu, select any name to use
as a base for the new profile. (You will rename the new file, so
the existing file you selected to build from will not be changed.)
Figure 4-47.
DFA Profile Name pull-down menu
3. On the Output DFA Profile window, specify the configuration
settings for the new output DFA profile.
