Xerox DocuPrint 180 System Configuration Manual Download Page 121

Page: 121 / 132

SETTING THE SYSTEM CONFIGURATION

XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM

4-63

Backing up and restoring configuration files

The following configuration files can be backed up and restored
between IPS systems operating system software version 5.4 or
higher:

•

Input DFA profiles (for DFA systems only)

•

Output DFA profiles (for DFA systems only)

•

Input tray groups

•

Output tray groups

•

System configuration files

•

Media library files.

Note:

Configuration files created with software versions

lower

than

5.4 cannot be saved or restored to a system running release 5.4 or
higher.

Note:

DFA profiles can be backed up and restored between IPS

systems with the same configuration and with operating system
software version 5.1.8 or higher.

Profiles created with software versions

lower

than 5.1.8 cannot be

saved or restored to a system running release 5.1.8 or higher.

Summary of Contents for DocuPrint 180





































































































































Search results

Summary of Contents for DocuPrint 180

Reviews:

Related manuals for DocuPrint 180

Brands by name

Popular brands

Xerox DocuPrint 180, System Configuration Manual

Search results

Summary of Contents for DocuPrint 180

Reviews:

Related manuals for DocuPrint 180

Brands by name

Popular brands