Xerox Document Centre 240 Reference Manual Download

Page: 79 / 322

Xerox Document Centre Reference Guide

Page 4 - 31

4. M

aki

ng C

ies

Invert Image

This feature allows you to make

Mirror Image

Negative Image

copies of your original documents.

Mirror Image

As illustrated below, this option

changes the direction of the original

image creating a mirror of the original. This option is primarily used
to transpose the position of a graphic.

Negative Image

Some originals have a dark background and white text. Using
Negative Image

on these originals can save on dry ink consumption.

This option will create copies that are the opposite of the original
document as illustrated below.

Summary of Contents for Document Centre 240



































































































































































































































































































































Search results

Summary of Contents for Document Centre 240

Reviews:

Related manuals for Document Centre 240

Brands by name

Popular brands

Xerox Document Centre 240, Reference Manual

Search results

Summary of Contents for Document Centre 240

Reviews:

Related manuals for Document Centre 240

Brands by name

Popular brands