Xerox Document Centre 240, Reference Manual

Page: 46 / 322

Page 3 - 12 Xerox Document Centre Reference Guide
Finisher
The Finisher consists of the Top Tray and the Stacker Tray.
The Top Tray holds sheets that are purged from the system or up to
250 copies of small paper that cannot be stapled. It can be set as a
destination tray for non-stapled jobs.
The Main Tray is the output tray for all other copies. It has two
staplers, each with a 5000 staple cartridge, that can staple sheets
ranging in size from 6.7 x 8 inch to 12 x 18 inch of 16 to 110 lb.
stock.
To ensure that the stapling of thin sets is satisfactory, the machine
stops after producing between 30 and 50 sets of 2 -15 sheets to allow
you to unload the machine. It automatically resumes printing after it
is unloaded or after one minute. These options are adjustable in
Tools. Refer to page 9-33 for more information.
Some versions of hardware may not require these options.
NOTE
Removing output while the machine is running may produce
finished sets that are incorrectly stapled. To unload the Finisher
while it is printing, Press the
Finisher Pause button and wait for the
tray to lower . After you unload, press the button again to continue.
Top Tray
Main Tray
Press the Finisher
Pause Button to
unload Stacker
Tray during a print
run