Xerox Document Centre 240 Reference Manual Download

Page: 204 / 322

Page 10 - 22

Xerox Document Centre Reference Guide

Logging In and Out of the Document Centre

Logging into the Document Centre

1. Press either User or Account ID button.

2. A keyboard with characters will appear

3. Enter the correct ID code, using the keypad to enter numeric

characters.

4. Press

Save

and repeat for the next ID.

5. The

Enter

button will become selectable,

6. Press

Enter

7. After you have successfully logged in, the features screen will

display.

Logging Out

1. Press either the

Access

Clear All

buttons.

2. Press the Log Out button

Summary of Contents for Document Centre 240



































































































































































































































































































































Search results

Summary of Contents for Document Centre 240

Reviews:

Related manuals for Document Centre 240

Brands by name

Popular brands

Xerox Document Centre 240, Reference Manual

Search results

Summary of Contents for Document Centre 240

Reviews:

Related manuals for Document Centre 240

Brands by name

Popular brands