Xerox Document Centre 240, Reference Manual

Page: 74 / 322

Page 4 - 26 Xerox Document Centre Reference Guide
Transparency Dividers
This feature allows you to create a single set of transparencies with
either blank or printed dividers. Use this screen to select the correct
transparency and stock trays. Pressing either the
Transparency
Stock or Divider Stock buttons allows you to select the paper tray
that contains the desired stock.
When producing a transparency set, it will always be single-sided on
transparency stock and collated with no stapling if dividers are
selected.
You can only set the quantity to one when using this feature.
Dividers
You have three options for Transparency Dividers; Off , Blank
Dividers, or Imaged Dividers . Any stock loaded in the machine may
be used as a divider as long as its size and orientation matches that
of the transparencies.
l
Off is the initial setting. Dividers will not be produced until you
select either Blank or Imaged Dividers .
l
Blank Dividers places a blank sheet between each
transparency.
l
Imaged Dividers places the same image on the divider sheet as
on the transparency.