Xerox Document Centre 240 Reference Manual Download Page 290

Page: 290 / 322

Page 15 - 2

Xerox Document Centre Reference Guide

General Operating Guidelines

A variety of situations can affect the quality of your output. For
optimal performance, ensure the following guidelines are followed.

Do not position the Document Centre in direct sunlight or near
a heat source such as a radiator.

Avoid sudden changes in the environment surrounding the
Document Centre. When a change occurs, allow the Document
Centre at

least two hours

to adjust to its new environment,

depending on the extent of the change.

Follow routine maintenance schedules for cleaning areas such
as the Document Glass and the output trays.

Always

set the Edge Guides in the paper trays to the size of the

media in the tray. Otherwise, you may experience jams.

Summary of Contents for Document Centre 240



































































































































































































































































































































Search results

Summary of Contents for Document Centre 240

Reviews:

Brands by name

Popular brands

Xerox Document Centre 240, Reference Manual

Search results

Summary of Contents for Document Centre 240

Reviews:

Brands by name

Popular brands