Xerox 8560DN - Phaser Color Solid Ink Printer Page 126 User Manual Download

Page: 126 / 167

Moving and Repacking the Printer

Phaser® 8560/8860 Printer

5-18

Within

10 seconds

after turning off the printer, select

Shut Down for Moving Printer

the control panel.

Note:

If you receive a

Power Down Error-Head not Parked

message at the control

panel, the printer is not ready to be moved. If the printhead is not locked, the printer can be
damaged during shipment.

Verify that the flag in the exit tray is in the raised position. When the flag is raised, the
printhead is locked.

Wait for the printer to complete the cool-down period for the ink to solidify. The fan shuts
down when it is cool enough to move.

Caution:

If you turn off the printer but do not select

Shut Down for Moving Printer

the control panel, the fan does not run, so you must wait longer for the ink to solidify. Wait
at least

30 minutes

for the printer to cool completely before moving or packing it.

Unplug the printer after the cool-down cycle is complete.

Use the hand holds on each side of the printer to lift it. Move the printer separately from
the 525-Sheet Feeder.

8860p-099

28 kg
60 lb.

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer








































































































































































Search results

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer

Reviews:

Related manuals for 8560DN - Phaser Color Solid Ink Printer

Brands by name

Popular brands

Xerox 8560DN - Phaser Color Solid Ink Printer, User Manual

Search results

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer

Reviews:

Related manuals for 8560DN - Phaser Color Solid Ink Printer

Brands by name

Popular brands