Xerox 8560DN - Phaser Color Solid Ink Printer User Manual Download

Page: 19 / 167

Overview of Network Setup and Configuration

Phaser® 8560/8860 Printer

2-2

Overview of Network Setup and Configuration

To set up and configure the network:

Connect the printer to the network using the recommended hardware and cables.

Turn on the printer and the computer.

Print the Configuration page and keep it for referencing network settings.

Configure the printer’s TCP/IP address, which is required to identify the printer on the
network.

■

Windows operating systems: Run the Installer on the

Software and Documentation

CD-ROM

to automatically set the printer’s IP address if the printer is connected to an

established TCP/IP network. You can also manually set the printer’s IP address on the
control panel.

■

Macintosh systems: Manually set the printer’s TCP/IP address on the control panel.

Install the driver software on the computer from the

Software and Documentation

CD-ROM

. For information on driver installation, see the section in this chapter for the

specific operating system you are using.

Note:

If the

Software and Documentation CD-ROM

is not available, you can download the

latest driver from the Xerox Drivers and Downloads website:

■

www.xerox.com/office/8560Pdrivers

(Phaser 8560 printer)

■

www.xerox.com/office/8860drivers

(Phaser 8860 printer)

See also:

Advanced Features Guide

www.xerox.com/office/8560Psupport

www.xerox.com/

office/8860support

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer








































































































































































Search results

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer

Reviews:

Related manuals for 8560DN - Phaser Color Solid Ink Printer

Brands by name

Popular brands

Xerox 8560DN - Phaser Color Solid Ink Printer, User Manual

Search results

Summary of Contents for 8560DN - Phaser Color Solid Ink Printer

Reviews:

Related manuals for 8560DN - Phaser Color Solid Ink Printer

Brands by name

Popular brands