Printing on Specialty Media
Phaser® 8560/8860 Printer
3-60
6.
Select one of the following
Short Edge
options:
■
Press the
OK
button if the correct short edge size is displayed as the current setup.
■
Select
Change
, and then press the
OK
button to enter a new short edge size. Press the
Up Arrow
and
Down Arrow
buttons to specify the short edge size, and then press the
OK
button.
7.
Select one of the following
Long Edge
options:
■
Press the
OK
button if the correct long edge size is displayed as the current setup.
■
Select
Change
, and then press the
OK
button to enter a new long edge size. Press the
Up Arrow
and
Down Arrow
buttons to specify the long edge size, and then press the
OK
button.
8.
Select the appropriate paper type, and then press the
OK
button.
9.
In the printer driver, select
Tray 1
as the paper source.
Note:
When you define a new custom size, it is stored in the printer so it can be used again.
Up to five custom sizes can be stored in the printer. If you define a new custom size after five
custom sizes have been stored, the new custom size replaces the least recently used.
