Xerox 6204 Wide Format Solution Page 284 User Manual Download

Page: 284 / 302

Problem Solving

Xerox 6204 Wide Format Solution
User Guide

10-
212

When the jammed paper is not visible from the opening, open the manual feed tray and the fuser
cover.

WARNING:

Never touch a labeled area on hot or sharp parts. You can get burned or injured.

Lift up the green lever to hold the baffle, and remove the jammed paper through the output port.

Notes

•

Gently remove the paper, taking care not to tear it.

•

If the paper is torn, make sure to remove all torn paper from the machine.

Lower the baffle.

Summary of Contents for 6204 Wide Format Solution















































































































































































































































































































Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands

Xerox 6204 Wide Format Solution, User Manual

Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands