Xerox 6204 Wide Format Solution Page 217 User Manual Download

Page: 217 / 302

System Administration

Xerox 6204 Wide Format Solution

User Guide

7-159

Using the numeric keypad to enter the digit(s), enter a system password in the [New Password]
field.

Note

The password must be a number that consists of from one to five digits.

Select the [Confirm Password] field.

The [Confirm Password] field will highlight and accept a numeric entry.

Enter the password in the [Confirm Password [field], and then press the [Save] button.

The new password will take effect immediately.

Summary of Contents for 6204 Wide Format Solution















































































































































































































































































































Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands

Xerox 6204 Wide Format Solution, User Manual

Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands