Xerox 6204 Wide Format Solution Page 249 User Manual Download

Page: 249 / 302

Maintenance

Xerox 6204 Wide Format Solution

User Guide

9-179

Tap the top of the toner cartridge repeatedly until all toner in the cartridge is loaded.

Slide the lever to the right, and align it with the triangular symbol.

Remove the toner cartridge.

Notes

•

Toner may adhere to the bottom surface of the toner bottle. Be careful not to get toner
on your hands or clothes.

•

Follow the instructions provided for disposal.

Close the back cover.

Summary of Contents for 6204 Wide Format Solution















































































































































































































































































































Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands

Xerox 6204 Wide Format Solution, User Manual

Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands