Xerox 6204 Wide Format Solution Page 238 User Manual Download

Page: 238 / 302

Machine Status

Xerox 6204 Wide Format Solution
User Guide

8-176

The following appear on the screen:

Ready to print/Printing

This message indicates that the printer is either currently processing a print or copy job, or is idle.

Job Name

The file name or name assigned by Accxes Client Tools.

Job Source

The source of the job data, for example, Ethernet, Scanner, Internal.

Quantity

The current count of completed copies or prints.

Page

The page that is currently printing.

Data Format

The name of the data format will display, for example, HP-GL, PDF, TIFF, etc.

[Close]

Closes the screen and returns you to the [Machine Status] menu.

Summary of Contents for 6204 Wide Format Solution















































































































































































































































































































Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands

Xerox 6204 Wide Format Solution, User Manual

Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands