Xerox 6204 Wide Format Solution, User Manual

Page: 258 / 302

Problem Solving
Xerox 6204 Wide Format Solution
User Guide 10-
186
Problems During Copying
The following helps you solve problems encountered during copying.
Symptoms Check Remedy
Copy does not
print at the
desired size. Did you select the correct
original size series? Select the original size series that matches with the
original size.
Refer to the section on Size Series Settings for Originals.
Did you select the correct
media size series? Select the media size series that matches the media
size.
Refer to the section on Media Settings.
Is the original inserted
correctly in the scanner? Load the original correctly.
Refer to Step 3 - Scanning the Original.
Is the original guide at the
correct position? Correctly set the original guide.
Refer to Step 3 - Scanning the Original.
Is the original folded or
bent? Straighten and correctly insert the original.
Refer to Step 3 - Scanning the Original.
Original does not
feed into the
original feeder. Is the original too small? The minimum size original that can be fed is
approximately 182mm/7inches wide by 210mm/8.25
inches long.
Refer to the section on Usable Originals.
Unable to copy
using the manual
feed tray
(Bypass). Is the media correctly loaded
in the manual feed tray? Correctly load the paper media.
Refer to the section on Using the Manual Feed Tray
(Bypass).
Original often
jams. Is the original in good
condition? Insert a usable type of original.
Refer to the section on Usable Originals and Step - 3
Scanning the Original.
Is the original too small or
too thick? The minimum size original that can be fed is
approximately 182mm/7inches wide by 210mm/8.25
inches long. Some thick originals may require the
removal of the front return guides.
Refer to the section on Usable Originals.
A corner of the
original is folded. Is the original curled? Flatten out the curl and insert the original again.