Xerox 6204 Wide Format Solution Page 67 User Manual Download

Page: 67 / 302

Copy

Xerox 6204 Wide Format Solution

User Guide

3-59

Note

For more information about this tab, refer to Setting up the [Basic Copy] selections which appears
later in this chapter.

Select the required image quality features from those displayed on the [Image Quality] tab.
Touching the tab moves it to the top.

Note

For more information about this tab, refer to Setting Up the [image Quality] selections which
appears later in this chapter.

Select the features to be set up from those displayed on the [More Features] tabs.

Notes

•

Touching the [2] or the [3] at the lower, right edge of the touch screen will display
additional features.

•

For more information about this tab, refer to Setting up the [More Features] selections
which appears later in this chapter.

Summary of Contents for 6204 Wide Format Solution















































































































































































































































































































Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands

Xerox 6204 Wide Format Solution, User Manual

Search results

Summary of Contents for 6204 Wide Format Solution

Reviews:

Related manuals for 6204 Wide Format Solution

Brands by name

Popular brands