Xerox 4595, System Administration Manual

Page: 88 / 402

Xerox 4595 Copier/Printer System Administration Guide 4-8
4. E-mail
NOTE 3: When you would like to move to the next value
without entering all 3 digits, select Save/Select Next.
– POP3 Server - Server Name
Enter if
By IP Address
has been selected for
POP3 Server - Setup
.
– POP3 Server - Port Number
Enter a value in the range from 1 to 65535.
– POP3 Server - Server Check Interval
Set the interval for checking the e-mail on the
POP3 server.
– POP3 Server - Server Name
Enter the name to login to the POP3 server.
– POP3 Password
Enter the same password twice in the
New
Password
and
Confirm Password
. If you do not
wish to set the password, leave it blank and select
Save
.
– POP3 Password Encryption
Select
ON(APOP)
to encrypt the password.
– Select
Save
and then select
Close
.
4.
Configure the mail transmission
•
Select
SMTP Server Settings
and then set the following
items for the SMTP server.
– SMTP Server - Setup
Select from
By IP Address
or
By Server Name
.
– SMTP Server - IP Address
Enter if
By IP Address
has been selected for
POP3
Server - Setup
.