Xerox 4595, System Administration Manual

Page: 50 / 402

Xerox 4595 Copier/Printer System Administration Guide 3-2
3. Using CentreWare Internet Services
Configuration on the machine
This section describes the configuration procedure for using
CentreWare Internet Services on the machine.
First enable the Internet service port, then set the IP address.
1.
Display the
System Administrator Menu
screen.
a. Press the
Log In/Out
button.
b. Enter the UserID using the numeric keypad and then
select
Confirm
.
NOTE: The default User ID value is 11111. When using the
Authentication feature, a password is required. The default
password is x-admin.
c. Select
System Settings
.
2. Enable the Internet service port on the machine.
a. Select
System Settings
.
b. Select
Network Settings
.
c. Select
Port Settings
.
d. Select
Internet Service (HTTP)
and then select
Change
Settings
.
e. Select
Internet Service - Port
and then select
Change
Settings
.
f. Select
Enable
and then select
Save
.
g. Select
Close
repeatedly until the
Network Settings
screen is displayed.
3. Set the IP address.
If the IP address is already set, this step is not necessary.
Also, in an environment with DHCP or BOOTP, configure the
way to obtain the address. If the address cannot be obtained
automatically or manual configuration is preferred, configure
the IP address, subnet mask, and gateway address.
a. Select
Protocol Settings
.
b. Select
TCP/IP - Get IP Address
and then select
Change
Settings
.
c. Select one from
DHCP
,
BOOTP
,
RARP
,
DHCP/Autonet
or
Manual
. If you select anything other than
Manual
, proceed
to step 4.
NOTE: When using a DHCP server, also configure the WINS
(Windows Internet Name Service) server.
d. Select
TCP/IP - Get IP Address
and then select
Change
Settings
.
e. Enter the IP address using the numeric keypad.