Xerox 4118P - WorkCentre B/W Laser, User Manual

Page: 16 / 192

Page 1-8 Xerox WorkCentre 4118 User Guide
Welcome
- A wall panel circuit breaker, fuse, or other safety device has been tripped.
- Liquid is spilled into the copier/printer.
- The equipment is exposed to water.
- Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect
the power cable from the electrical outlet.
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety
guidelines at all times.
Do These:
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
¾
This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will fit only
into an earthed electrical outlet. This is a safety feature. To avoid risk of electric shock,
contact your electrician to replace the electrical outlet if you are unable to insert the plug
into it. Never use a plug that lacks an earth connection terminal to connect the product to
an electrical outlet.
¾
Always follow all warnings and instructions that are marked on or supplied with the
equipment.
¾
Always exercise care when moving or relocating equipment. Please contact your local
Xerox Service Department, or your local support organization to arrange relocation of the
product to a location outside of your building.
¾
Always locate the equipment in an area that has adequate ventilation, and the room for
servicing. See Install guide for minimum dimensions.
¾
Always use materials and supplies specifically designed for your Xerox equipment. Use of
unsuitable materials may result in poor performance.
¾
Always unplug this equipment from the electrical outlet before cleaning.