XENO XDR5K4 Setup And User'S Manual Download

Page: 96 / 187

7.2 Auxiliary Functions of Playback

7.2.1 Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in order to check image details of the video when abnormal events happen.

Steps:

•

Using a Mouse:

Go to Playback interface and click button

and

until the speed changes to

Single

frame. One click on the

playback screen represents playback or adverse playback of one frame. It is also feasible to use button

in toolbar.

7.2.2 Smart Search

Purpose:

In order to locate motion detection event easily and accurately when playing back, you are allowed to analyze a certain
area (scene) dynamically, and to get all of the related motion detection events that occurred in this area.

Steps:

Go to Playback interface and play the video.

Note:

The smart search function is available for single-channel playback only.

Figure 7.31 Interface of Playback by Time

Right-click mouse and then choose

Smart Search

to go to analysis area selection interface.

Summary of Contents for XDR5K4




























































































































































































Search results

Summary of Contents for XDR5K4

Reviews:

Related manuals for XDR5K4

Brands by name

Popular brands

XENO XDR5K4, Setup And User'S Manual

Search results

Summary of Contents for XDR5K4

Reviews:

Related manuals for XDR5K4

Brands by name

Popular brands