XENO XDR5K4, Setup And User'S Manual

Page: 134 / 187

134
Enable SSL(optional): Click the checkbox to enable SSL if required by the SMTP server.
Sender: The name of sender.
Sender’s Address:
The Email address of sender.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver’s Address:
The Email address of user to be notified.
Enable Attached Pictures: Check the checkbox of Enable Attached Picture if you want to send email with
attached alarm images.
Interval: The interval refers to the time between two actions of sending attached pictures.
6. Click the Apply button to save the Email settings.
7. You can click the Test button to test whether your Email settings work. The corresponding Attention message
box will pop up.
Figure 10.11
Email Testing Attention
10.2.4 Configuring SNMP
Purpose:
You can use SNMP protocol to get device status and parameters related information.
Steps:
1. Enter the Network Settings interface.
Menu > Network > Network Settings
2. Select the SNMP tab to enter the SNMP Settings interface.