XENO XDR5K4, Setup And User'S Manual

Page: 64 / 187

64
2) Check the checkbox after Enable .
3) Select Mode from the dropdown list.
There are three different modes for the date format to configure holiday schedule.
4) Set the start and end date.
5) Click Apply to save settings.
6) Click OK to exit the Edit interface.
3. Enter Video Schedule settings interface
Menu>Recording>Schedule
1) Check the checkbox after Enable Schedule .
2) Click Edit .
3) Select Holiday from Schedule dropdown list.
Figure 6.12 Edit Schedule
– Holiday
4) Select Motion or Normal (TL) from the Type dropdown list.
5) If you need all day recording, check the All Day checkbox. Otherwise leave it blank.
6) Set start/end time for holiday schedule.
Note:
Up to 8 periods can be configured for each day. And the time periods can’t be overlapped each other.
In the time table of the channel, both holiday schedule and normal day schedule are displayed. Repeat the above
steps3)-6) to set Holiday schedule for other channel. If the holiday schedule can also be used to other channels, click
Copy and choose the channel you want to apply the settings.