XENO XDR5K4, Setup And User'S Manual

Page: 143 / 187

143
10.4 Configuring Network Detection
Purpose:
You can obtain network connecting status of DVR through the network detection function, including network delay,
packet loss, etc.
10.4.1 Testing Network Delay and Packet Loss
Steps:
1. Enter the Network Traffic interface.
Menu > Network > Network Data
2. Click the Network Detection tab to enter the Network Detection menu.
Figure 10.24 Network Detection Interface
3. Enter the destination address in the text field of Destination Address .
4. Click the Test button to start testing network delay and packet loss. The testing result pops up on the window. If
the testing is failed, the error message box will pop up as well.
Figure 10.25 Testing Result of Network Delay and Packet Loss
10.4.2 Exporting Network Packet
Purpose:
By connecting the device to network, the captured network data packet can be exported to USB-flash disk and other
local backup devices.