XENO XDR5K4, Setup And User'S Manual

Page: 128 / 187

128
10.2 Configuring Advanced Settings
10.2.1 Configuring DDNS
Purpose:
If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used for
network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1. Enter the Network Settings interface.
Menu > Network > Network Settings
2. Select the DDNS tab to enter the DDNS Settings interface, as shown in Figure 10.2.
Figure 10.2 DDNS Settings Interface
3. Check the DDNS checkbox to enable this feature.
4. Select DDNS Type . Five different DDNS types are selectable: IPServer, DynDNS, PeanutHull, NO-IP,
vistaDDNS.
•
IPServer: Enter Server Address for IPServer.
Note: The Server Address should be the IP address of the PC that runs IPServer.