38
Previous
Switch to the previous screen.
Next
Switch to the next screen.
Start/Stop Sequence
Enable/disable the auto-sequence of the screens.
Aux
Switch to the auxiliary output mode and the operation for the main output is
disabled.
Start Recording
Start all-day normal recording or motion detection recording for all channels.
Quick Set
Set the video output mode to Standard, Bright, Gentle or Vivid.
Play
Play back the video of the selected channel of current day.
Search
Enter the search menu of the system by right clicking the mouse.
Menu
Enter the main menu of the system by right clicking the mouse.
Note:
The
dwell time
of the live view configuration must be set before using
Sequence
.
4.2.2 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
•
Camera:
Switch to a full screen display of the selected camera. Camera can be selected from a dropdown list.
•
Multi-screen:
Switch between different display layout options. Layout options can be selected from a
dropdown list.
•
Previous:
When displaying less than the maximum number of cameras in Live View, clicking this feature will
switch to the previous set of displays.
•
Next:
When displaying less than the maximum number of cameras in Live View, clicking this feature will switch
to the next set of displays.
•
Quick Set:
Set the video output mode to Standard, Bright, Gentle or Vivid.
•
Menu Output Mode:
Select the menu output mode to HDMI/VGA, Main CVBS or Auto.
•
Main Monitor:
Switch to the Main Output mode and the operation for the auxiliary output is disabled
.
Note: In the live view mode of the main output monitor, the menu operation is not available while in
Aux output mode.
4.2.3 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you point the mouse to the bottom of
the screen.
Figure 4.2 Quick Setting Toolbar
Table 4.3 Description of Quick Setting Toolbar Icons
Icons
Description
Icons
Description
Icons
Description
Summary of Contents for XDR5K4
