XENO XDR5K4, Setup And User'S Manual

Page: 48 / 187

48
5.2 Setting Presets, Tours & Learns
Before you start:
Please make sure that the presets, tours and learns should be supported by PTZ protocols.
5.2.1 Customizing Presets
Purpose:
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu >System> Communications>PTZ More
Figure 5.2 Communications - More Settings
2. Use the directional button to wheel the camera to the location where you want to set preset.
3. Click the round icon before Save Preset .
4. Click the preset number to save the preset.
Repeat the steps2-4 to save more presets. If the number of the presets you want to save is more than 17, you can click
[…] and choose the available numbers.
Figure 5.3 More Presets