Introduction
1–4
975-0330-01-01
Figure 1-2
Gateway Bottom
Item
Description
1
Inverter (Xanbus RJ-45) ports
for connecting the inverter and other
Xanbus devices to the Gateway.
Caution
: see “Equipment damage” below.
2
Ethernet port
for connecting the Gateway to a router or computer.
Caution
: see “Equipment damage” below.
3
Wi-Fi Antenna
.
4
Reset button
. The Reset button returns the Gateway to its default
settings. See “Resetting the Gateway to Factory Defaults” on page 3–
21.
5
RS-485 port
for connecting Modbus-equipped devices (reserved for
future use).
6
Zigbee (RJ-11) port
(do not use—not supported at this time).
CAUTION: Equipment damage
Although the cables and connectors that connect the Gateway to the Xanbus
network are identical to Ethernet cables and connectors, the communication
interface is not Ethernet. It is based on CAN bus and also supplies the Xanbus
network devices with DC power. The DC power in the Xanbus network is not
compatible with Ethernet. Personal computers or routers may be damaged if
connected directly to powered Gateway Inverter ports. The Gateway can be
damaged if a powered Xanbus cable is connected to the Ethernet port.
Inverter
WARNING!
Not for computer
RS485
Ethernet
Zigbee
1
2
4
5
6
3
www.xantrex.com.ua
Summary of Contents for Gateway
