Xantrex Freedom SW 230V 815-3524-02, Owner'S Manual, Page: 69 / 104

975-0696-01-01 55
Configuring the Freedom SW using the SCP
Table 13 on page 55 describes the items on the
Custom Battery
Settings
menu.
NOTE : If a warning is received indicating that a setting is not
accepted by the SCP, gradually increase the value of the setting until
the SCP accepts it. This type of warning means that an internal
minimum threshold value is being crossed and therefore the setting
cannot be saved.
Table 13 Custom Battery Settings Menu Description
Item Description
Eqlz Support
Enables or disables the ability to enter an equalization cycle. Refer to the
battery manufacturer’s specifications to determine whether equalization is
recommended.
Eqlz Voltage
a
a. The
Eqlz Voltage
setting is displayed when
Eqlz Support
is set to
On
.
Selects the equalization voltage. Consult your battery manufacturer for
equalization voltage setting.
Bulk Voltage
Sets the bulk voltage for a custom battery type. This setting must be 0.4 V
or higher than Bulk Termination Voltage. See note below.
BulkTerminat
ion Voltage
Sets the bulk termination voltage for a custom battery type. This setting
must be 0.4 V or lesser than Bulk Voltage. See note below.
Absorb
Voltage
Sets the absorption voltage for a custom battery type.
Float
Voltage
Sets the float voltage for a custom battery type. See note below.
Batt Temp
Comp
Battery temperature compensation for a custom battery type. This setting
is the reference that the BTS uses to adjust the charging voltage when the
temperature is above or below 25 °C.
FSW 230V Owners Guide.book Page 55 Tuesday, August 7, 2018 9:38 AM