Xantrex Freedom SW 230V 815-3524-02, Owner'S Manual, Page: 34 / 104

20 Freedom SW 230V Owner’s Guide
Operating the Freedom SW with the SCP
Figure 8 Xanbus System Control Panel (SCP)
Item Description
1 AC In/Charge light indicates that qualified AC is
present at the input of an inverter/charger. When the
Freedom SW 230V is connected to a qualified AC
source like the utility grid (shore power) or a
generator, this light on the SCP illuminates.
2
1
4
3
5
6
2 Inverter On light illuminates when the Freedom
SW 230V is inverting using battery power.
3 Low Battery light illuminates when the battery
voltage on the Freedom SW 230V is low.
4 Fault light indicates a condition that requires user
attention and intervention. The Fault light
illuminates when any Xanbus-enabled device
connected to the network is in fault. See “Fault
Types” on page 73 for the definitions of a fault and
warning.
5 STBY/ON Fault Clear button is used to clear
active faults on the system if pressed momentarily.
It also toggles all Xanbus-enabled devices on the
system between Operating and Power Save (Safe)
mode when held down for more than five seconds.
See “Inverter Operation Using the Front Panel” on
page 14.
6 Screen displays menus, settings, and system
information. Displays a menu screen title, four lines
of menu items, and a line that contains small arrows
that depict pointers to SCP buttons.
Item Description
FSW 230V Owners Guide.book Page 20 Tuesday, August 7, 2018 9:38 AM