![background image](http://html1.mh-extra.com/html/xantrex/freedom-sw-230v-815-3524-02/freedom-sw-230v-815-3524-02_owners-manual_3216935045.webp)
975-0696-01-01
31
Operating the Freedom SW with the SCP
Line 3
Label
:
Battery
Field 2
: Total battery current. Negative value if the battery is
discharging and positive value when charging.
Field 3
: Battery voltage
Field 4
: Battery temperature. Displays the highest temperature when
reading multiple inverters that are installed. Displays
N/A
when
there is no BTS attached.
Line 4
Label
:
Load
Field 5
: Total power drawn by AC loads connected to the unit.
Field 6
: Inverter output voltage at load terminals of one inverter/
charger unit.
Field 7
: Sum of all current drawn out by the AC loads.
Line 5
Label
:
AC In
Field 8
: AC input voltage at AC In terminals of the inverter/charger.
Field 9
: Sum of all current drawn into one inverter/charger unit.
Field 10
: AC input frequency
STBY/ON Fault
Clear
button
Press momentarily to clear all faults on all devices on the network.
Press and hold for five seconds to switch all devices in the network
between operating and safe modes.
Enter
,
Up arrow
,
Down arrow
buttons
(pressed
simultaneously)
Switches between Basic Settings and Advanced Settings.
Table 3
Device Setup Screen Status Information
FSW 230V Owners Guide.book Page 31 Tuesday, August 7, 2018 9:38 AM
Summary of Contents for Freedom SW 230V 815-3524-02
