Xantrex Freedom SW 230V 815-3524-02, Owner'S Manual, Page: 24 / 104

10 Freedom SW 230V Owner’s Guide
Freedom SW Inverter/Charger Mechanical Features
Figure 5 Isometric View of the Front Panel and AC/DC Side Panel
XANBUS INTERFACE STACKING
FREEDOM SW INVERTER/CHARGER
CLEAR FAULT
RESET
INVERTER
ENABLE
INVERTER
ENABLED
AC IN FAULT
GEN
SUPPORT
CHARGING WARNING
FREEDOM
SW
3524
FREEDOM
SW
3524
CLEAR F
AUL
T RESE
T INVER
TER
ENABLE
INVER
TER ENABLED
AC IN
FAU
LT
GEN SUPPOR
T CHARGING
WA
RN
ING
3
1
4
2
5 6 7 9 8
Item Description
1 DC terminals.
2 AC wiring compartment access panel with compartment
cover on.
3 FAULT LED illuminates solid if a fault condition occurs and
flashes intermittently when a
WARNING
condition is active.
4 When AC is present and qualified, the
AC IN
LED will
illuminate solid indicating also that AC is passing through.
CHARGING LED flashes intermittently when the Freedom
SW 230V is in charge mode and is producing DC output to
charge your batteries.
5
INVERTER ENABLED
indicates the invert mode is enabled.
This is different from the inverter being “on”. When enabled
the inverter can be on or off. When disabled, the inverter is
always off. If AC is present and invert mode is enabled, this
LED remains illuminated even though AC power is being
passed through.
GEN SUPPORT LED flashes intermittently when the
inverter is in generator support mode and is assisting the
generator.
6
INVERTER ENABLE
button is used to enable or disable the
inverter.
7 CLEAR FAULT RESET button is used to clear any active
faults if pressed momentarily. If held down for more than three
seconds, the unit will reset (reboot) itself.
8 STACKING port is not used for parallel stacking. Do not
connect any cable to the port. It is reserved for future use.
9
XANBUS INTERFACE
ports are used to connect Xanbus-
enabled devices including the optional SCP and AGS.
FSW 230V Owners Guide.book Page 10 Tuesday, August 7, 2018 9:38 AM