1
Controllers
Smart Pad
3
INSTALLATION INSTRUCTIONS
OFF
GLOBAL
MUTE
AM/FM
VOL
TNR
VOL
TNR
CATV
CD
TAPE
CAM
VCR
LD
TUNER
SAT
SMARTPAD
3
™
PROGRAMMABLE KEYPAD SYSTEM
INTRODUCTION
The
SmartPad
3
is the next generation of the SmartPad
2
, the world's first wall mounted, IR learning,
programmable modular keypad system. It incorporates many unique features to accommodate the growing
needs of the fast moving custom installation marketplace.
UNIQUE FEATURES
•
Eight different Key Modules
are provided which dock into
three different Base Modules
. Over 50
keypad combinations are possible!
•
One, two and three gang
wall mounting options are available.
•
Buttons are replaceable and interchangeable
within the key module.
•
A selection of buttons
with commonly used markings
are included
with each key module. Many
specialized versions are also separately available from Xantech.
•
Pre-labeled buttons
do not require any tedious insertion of small icon key "caps".
•
Up to 8 memory banks
can be selected by source buttons
with LED indicators
.
•
Two tiers of memory per button.
2nd tier is accessed by
"Push and Hold"
. Applies to both source select
and control function keys.
•
Sequence commands, including 1 to 30 second delays
, can be programmed into any button (including
the 2nd tier) without using up button spaces anywhere else on the keypad.
•
Status Input
permits source buttons to light up with +5 to +30V representing a system power ON condition
as well as the selected source.
•
Intelligent Power Management
. Allows power commands to be sent only if the system or zone is Off,
thus preventing unintended shutdown when switching sources.
•
IR Commands are "learned" directly
from hand held remotes
or by using Xantech's exclusive
Dragon Drop-IR™ software
.
