Wyse Winterm 3200LE, Administrator'S Manual

Page: 119 / 352

11
Creating New Connections
The New Connection dialog box is used to create new connections. Figure 11-1
shows the New Connection dialog box.
Figure 11-1 New Connection Dialog Box
Using the New Connection Dialog Box
To invoke the dialog box:
1. Click on the Configure tab in the Winterm Connection Manager dialog box.
2. Click on Add command button on the Configure properties sheet.
See “Connection Management” for details about the Winterm Connection
Manager.
Use the scroll list shown in the dialog box above to select the type of connection
protocol you want. When you choose from the list above, you are deciding which
connection protocol you want to use to connect to a server. Four selections are
available.