Wyse Winterm 3200LE, Administrator'S Manual

Page: 77 / 352

6
Initial Terminal Setup
The Setup Wizard is used for initial setup of the terminal’s properties. The wizard
runs when:
• You power-up your terminal for the first time.
• Your terminal has been restarted with a G key reset.
• A new image has been downloaded to your terminal but is older than the image
currently in use.
• You use the Reset the Terminal to Factory-Default Property Settings
function on the General properties sheet.
Using the Setup Wizard
The Setup Wizard lets you set terminal network configuration and terminal display
parameters. Several dialog boxes display in succession during the process. Each
dialog box is self-explanatory. Some dialog boxes are informational and require no
user input. Other dialog boxes prompt you for network, printer, and display
information. See Figure 6-1 to view the first dialog box of the wizard.
Note
Any future changes can be made using the Terminal
Properties dialog box. You can launch this dialog box
from the Winterm Connection Manager by pressing
the F2 key. See “Resetting Terminal Properties.”