Würth EWS 10-125 Compact, Manual

Page: 26 / 344

26
Noise /vibration information
Values measured in accordance with EN 60745.
Item
5707 003 X 5707 004 X 5707 005 X 5707 006 X 5707 007 X
a
h, SG
/K
h, SG
* m/s
2
6.0/1.5 6.0/1.5 6.0/1.5 6.0/1.5 6.8/1.5
a
h, DS
/K
h, DS
* m/s
2
< 2.5/1,5 < 2.5/1,5 < 2.5/1,5 < 2.5/1,5 3.0/1.5
L
pA
/K
pA
dB (A)
93.0/3 94.5/3 93.0/3 93.0/3 93.0/3
L
WA
/K
WA
dB (A)
104.0/3 105.5/3 104.0/3 104.0/3 104.0/3
a
h
,
SG
= Vibration emission value (surface grinding) L
pA
= Sound pressure level
a
h
,
DS
= Vibration emission value (grinding with grinding disc) L
WA
= Sound power level
K
h, SG/DS
= Uncertainty (vibration) K
pA
,K
WA
= Uncertainty
* The specified vibration emission values:
• Were measured using a standardised test method and can be used to compare one electric tool with
another.
• Can be used for a rough assessment of the exposure.
WARNING!
The noise level may exceed 80 dB(A) during work.
Â
Risk of severe injuries and acoustic trauma.
¾
Wear ear protectors!
Initial Use
Attention!
Before initial use, check that the specifications of
your mains power supply correspond to the mains
voltage and mains frequency indicated on the
name plate.
Attaching auxiliary handle
CAUTION!
Risk of severe injuries.
¾
Work only with the auxiliary
handle [5] attached!
¾
Screw in the auxiliary handle firmly
on the left-hand or right-hand side
of the machine.
Attaching the safety hood (Fig. II)
CAUTION!
Risk of severe injuries.
¾
For safety reasons, use only the
safety hood intended for the
respective grinding wheel!
Use only attachments with a
clearance of at least
3.4 mm to the safety hood.