wtw pHotoFlex, Operating Manual

Page: 17 / 111

pHotoFlex / pHotoFlex Turb Commissioning
17 ba75491e05 04/2009
3 Commissioning
3.1 Scope of delivery
z
Handheld photometer, pHotoFlex Turb or pHotoFlex
z
4 batteries, 1.5 V type AA (in the battery compartment)
z
Optional: Accumulator pack and power pack with Euro plug
and exchange plugs for USA, UK, and Australia
z
Optional: LabStation
z
1 empty cell 16 mm
z
2 empty cells 28 mm
with label to mark the cell for turbidity measurements
z
AMCO
®
-Clear turbidity standard (pHotoFlex Turb only)
z
Microfiber cloth to clean the meter
z
Compact operating manual and short operating manual
z
CD-ROM with
– detailed operating manual
– photometry analysis manual with analysis specifications
– software to program user-defined methods
Note
The optional parts of the scope of delivery are available as accessories
(see section 8.1).
3.2 Power supply
You can operate the meter either with batteries, accumulator pack or a
power pack. The power pack supplies the meter with low voltage
(9 V DC). At the same time, the accumulator pack is charged. The ac-
cumulator pack is charged even while the meter is switched off.
The LoBat display indicator appears when the batteries or accumulator
pack is nearly discharged.
Charging time of the
accumulator pack
approx. 36 hours.
CAUTION
The line voltage at the operating site must lie within the input volt-
age range of the original power pack (see chapter 7 T
ECHNICAL DA
-
TA
).
CAUTION
Use original power packs only (see chapter 7 T
ECHNICAL DATA
).