Safety
inoLab pH/ION 735
10
2.2
General safety instructions
This instrument is built and inspected according to the relevant guide-
lines and norms for electronic meters (see chapter 7 T
ECHNICAL
DATA
).
It left the factory in a safe and secure technical condition.
Function and operating
safety
The smooth functioning and operational safety of the meter can only be
guaranteed if the generally applicable safety measures and the specific
safety instructions in this operating manual are followed during opera-
tion.
The smooth functioning and operational safety of the meter can only be
guaranteed under the environmental conditions that are specified in
chapter 7 T
ECHNICAL
DATA
.
If the instrument was transported from a cold environment to a warm
environment, the formation of condensate can lead to the faulty func-
tioning of the instrument. In this event, wait until the temperature of the
instrument reaches room temperature before putting the instrument
back into operation.
Safe operation
If safe operation is no longer possible, the instrument must be taken out
of service and secured against inadvertent operation!
Safe operation is no longer possible if the meter:
!
has been damaged in transport
!
has been stored under adverse conditions for a lengthy period of
time
!
is visibly damaged
!
no longer operates as described in this manual.
If you are in any doubt, please contact the supplier of the instrument.
Obligations of the
purchaser
The purchaser of this meter must ensure that the following laws and
guidelines are observed when using dangerous substances:
!
EEC directives for protective labor legislation
!
National protective labor legislation
!
Safety regulations
!
Safety datasheets of the chemical manufacturers.
