wtw DIQ/S 182-XT-4, Operating Manual

Page: 23 / 152

System 182-XT-4 Installation
3 - 9 ba75753e06 12/2014
3.5 Connecting system components
3.5.1 Connecting MIQ modules: General information
You can connect the DIQ/S 182 XT-4 with MIQ modules without
connecting cable (stacking). According to the same principle
MIQ modules can also be connected with one another.
Mounting direction
NOTE
For optimum stability only one MIQ module may be attached to the
Variant 1 - stack expansion
forwards.
The DIQ/S 182-XT-4 or an MIQ
module is attached by its back to
the lid of an MIQ module
(from page 3-11).
Select this variant if an
MIQ module is already
permanently installed, e.g. to a
wall.
Variant 2: - stack expansion
backwards.
An MIQ module is attached with
its lid to the back of the DIQ/
S 182-XT-4 or another
MIQ module (page 3-14).
Select this variant if the DIQ/
S 182-XT-4 or the front
MIQ module is already
permanently installed, e.g. in a
panel.
MIQ Module
MIQ Module
DIQ/S 182 XT-4
MIQ Module
MIQ Module
MIQ Module
DIQ/S 182 XT-4
MIQ Module