Original Operating Instructions
BATD0100-ES-1-480-1 (Outdoor)
Operation
O_BATD0100-ES-1-480-1_(Outdoor)_V2.2_US
Page
85
of
110
7 Operation
Danger to life due to incorrect installation!
•
Carry out the installations as described in Section
Installation
to ensure a safe and proper operation.
If the product is not installed correctly it may cause
damage to the product and result in serious injury or death
to individuals within the products vicinity.
Danger de mort dû à une installation incorrecte !
•
Effectuer les installations décrites à la section
Installation
afin d’assurer un fonctionnement sûr et
correct.
Si le produit n’est pas correctement installé, cela risque
d’endommager le produit et de provoquer des blessures
graves ou la mort des personnes se trouvant à proximité
du produit.
7.1 Interfaces
The product has two user interfaces:
•
Modbus TCP interface
•
Ethernet/EtherCAT interface
7.2 Operating Modes
The operating modes and switching between them are carried out by external
control via the Ethernet interface. Controlling the product via the Ethernet
interface is described in the
Interface Description
.
Error monitoring is active in each operating state. If an error occurs, all functions
of the product are stopped automatically. An error message is available via the
Modbus TCP interface. When the cause of the error is eliminated, the product
must be reset via the higher-level control to restart operation.
7.3
Starting the Product
Procedure:
1.
Switch
the AC circuit breaker in position
ON
. The DC circuit breaker is
operated automatically.
NOTICE: Operation is started after the appropriate checks via the user
interface.
Summary of Contents for BATD0100-ES-1-480-1
Page 110: ......
