2-22
•
Settings
E
and
F
pertain to the way the RF Terminal handles illegal
statements coming from the host computer. RF Terminal software
versions
prior
to 9.059 did not handle illegal statements the same way
as current versions.
This setting is really only applicable if you had
written your host program to be compatible with RF Terminal
versions prior to RFT9059.
Base and Relay Setup
The Base and Relay Setup is only accessible via the RF 700 Configuration
Utility included on the Utilities CD that came with your RF Terminal. You can
also download the utility from our website at:
http://www.barcodehq.com/utilities/rfserial.exe
Using the RF 700 Configuration Utility
After you install the Configuration Utility from the CD or from the web,
make sure your Base or Relay Station is attached to one of the computer
COM ports using the 9 pin serial cable (F36) included with your system and
that the power supply (5v from Worth Data ONLY) is plugged in. A Base
Station will light the LED Green, while a Base jumpered as a Relay will
light a the LED Yellow, so be sure your unit is jumpered properly.
Start the RF 700 Configuration Utility.
If you know which COM port you are attached to, select that port in the
program, then click "
Continue
". If you are unsure of the COM port number,
the program can find it for you. Enter the range of COM ports to search,
then click "
Find Base Station
".
