Worth Data 701 RF, User Manual

Page: 33 / 155

2-18
•
Scan up to seven 4-digit pairings where the first 2 digits represent the
hex number to
replace and the second 2 digits represent the hex
number to insert . You can have up to seven character reassignments.
•
Scan
SET
You can eliminate the output of a character by using
FF
as the hex number to
insert. For example, if you wanted to eliminate all
$
, following the above
instructions, enter
24FF
.
Beep Tone
Lowest 0
Low 1
Medium 2
High 3
Highest 4
No Beep Tone 5
Batteries
Alkaline Batteries 0
Rechargeables 1
•
In order to get an accurate Battery Status reading; you must select the
correct battery type. If you ordered NiMH batteries (part number L01)
with the RF Terminal, this will be set to Rechargeable before shipping.
•
If you didn't order re-chargeable batteries, this shipped setting is
Alkaline.
Battery Status can be displayed by pressing the STATUS key
on the RF Terminal keypad.
•
Before you can recharge the batteries, this parameter must be set to
Rechargeables. Don't try to recharge alkaline batteries. They might
explode. This will void your warranty.
•
If you decide to use rechargeables after ordering the RF Terminal
without rechargeables included, you must change this setting allow
recharging.
Date Format
US Format 0
European Format 1
•
The US format of
mm/dd/yy
is the default setting.
•
If you switch formats, you must reset the date (
SET DATE
) in the new
format also.
Date/
Time
Speaker