2-13
Codabar
Enable Codabar
0
Disable Codabar
1
Enable CLSI Codabar
2
Disable CLSI Codabar
3
Disable Start/Stop character transmission
4
Enable Start/Stop character transmission
5
•
CLSI is a form of Codabar often used by libraries.
•
Setting
5
will transmit the Codabar
start
and
stop
characters with the bar
code data to your computer. If you are varying the start and stop characters
to differentiate between different labels, transmitting the start and stop can
be helpful. See
Appendix G
;
Codabar
for more information.
2 of 5 Code
Enable Interleaved 2 of 5
0
Disable Interleaved 2 of 5
1
Enable Interleaved 2 of 5 check digit
2
Disable Interleaved 2 of 5 check digit
3
Enable check digit transmission
4
Disable check digit transmission
5
Enable Standard 2 of 5
6
Disable Standard 2 of 5
7
Enable UPC- E1
8
Disable UPC- E1
9
Normal Code 39 decode (Laser scanners)
B
Loose Code 39 decode (for use with LZ400 thru windshields)
C
Looser Code 39 decode (for use with LZ400 thru windshields)
D
•
Setting
2
requires that the last digit in your bar code conform to the
specifications for the 2 of 5 check digit calculation. See
Appendix I; 2
of 5 Code
for more information.
•
Transmission of the check digit (
5
) requires the use of setting
2
and will
transmit the check digit along with the bar code data to the computer.
•
Setting
B
pertains to the decoding algorithms used by the RF Terminal
when using a Laser Scanner. In most cases, this should be left at the
default
B
setting.
•
If scanning VINs (Code 39) through windshields with a laser scanner,
(applies to the LZ400 only) try setting this parameter to
C
or
D
. Try
D
first. If you get substitutions, try
C.
Bar
Codes
Bar
Codes
