C-3
Zebra Cameo/QL 3 Printers
These are the pin-outs for the cable needed to connect the Zebra Cameo
or QL 3 Printer to a Worth Data R/F Terminal. You can order our
C12
cable for $30, or if you already have a cable from Zebra and feel
confident in your cable-making abilities, you can simply clip off the
connector end that should connect to the RF Terminal (
not
the 8 pin din
end) and replace the clipped-off connector with an RJ45 connector
according to the pin-outs on the next page:
Function
Printer 8 pin
RF Terminal RJ45
Function
Receive 1
2
Transmit
Transmit 2
3
Receive
CTS 3
not
connected
none
RTS 4
7
CTS
Ground 5
4
Ground
DSR 7
8
DTR
DTR 8
not
connected
none
Zebra Cameo/ QL 3 - to - RF Terminal Pin-outs
Laser and CCD
The laser and CCD TTL pin-outs are:
Pin
Function
1 5
volts
2 Data
3 Phase
4 LED
5 Trigger
6 Enable
7 Shield(drain)
8 Ground
Laser and CCD Pin-outs
Remember:
If you make your own cables, you are on your own. We accept
NO
RESPONSIBILITY for damages resulting from incorrect wiring.
Cameo
Connector
RJ45
connector for
RF Terminal
