Woodstock Shop Fox W1805, Owner'S Manual

Page: 28 / 48

-26-
Model W1805 (For Machines Mfd. Since 7/15)
O
PE
R
ATIO
NS
7.
Unlock the tracer pin, and adjust the thumbwheel as
necessary until the cutter is positioned as shown in
Figure.37
.
8.
Lock the tracer pin.
Cutter.Depth.Stop
The cutter depth stop adjustment bolt (
Figure.38
)
dictates the depth of the sockets ( Figure.39 ) by
controlling how far the cutter will cut into the horizontal
workpiece.
The cutter depth should be the same as the tail thickness,
so that when the joint is assembled the tails are flush
with the pins ( Figure.40 ).
Cutter aligned
with pencil line
at the bottom of
the workpiece.
Cutting edge
rotated to
maximum
point of rotation
from side view.
(Side View)
Table
Vertical
Workpiece
Cutter
Figure.37.. Cutter position for setting tail
thickness (as viewed from the side).
Figure.38.. Cutter depth stop adjustment
bolt.
Cutter Depth
Stop Adjustment
Bolt
Socket Depth
Figure.39.. Socket depth.
Horizontal Workpiece Vertical Workpiece
1
⁄
16
"
...as cut
Sockets
Tails
Board Face Board End
Figure.40.. Understanding correct cutter
depth.
Continued on next page