-12-
Model W1805 (For Machines Mfd. Since 7/15)
SE
TU
P
•. Floor.Load:
This machine distributes a
heavy load in a small footprint. Some
residential floors may require additional
bracing to support both machine and
operator.
•. Working.Clearances:
Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your machine.
•. Lighting:
Lighting should be bright enough
to eliminate shadow and prevent eye strain.
•. Electrical:.
Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extension cords are clear of high-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
MAKE. your. shop. “child.
safe.”. Ensure. that. your.
workplace. is. inaccessible.
to. children. by. closing. and.
locking.all.entrances.when.
you.are.away..NEVER.allow.
untrained. visitors. in. your.
shop. when. assembling,.
adjusting. or. operating.
equipment..
Cleaning.Machine
The unpainted surfaces of your machine are
coated with a heavy-duty rust preventative that
prevents corrosion during shipment and storage.
This rust preventative works extremely well, but
it will take a little time to clean.
Be patient and do a thorough job cleaning your
machine. The time you spend doing this now will
give you a better appreciation for the proper
care of your machine's unpainted surfaces.
There are many ways to remove this rust
preventative, but the following steps work well
in a wide variety of situations. Always follow the
manufacturer’s instructions with any cleaning
product you use and make sure you work in a
well-ventilated area to minimize exposure to
toxic fumes.
Before.cleaning,.gather.the.following:
• Disposable rags
• Cleaner/degreaser (WD•40 works well)
• Safety glasses & disposable gloves
• Plastic paint scraper (optional)
Basic.steps.for.removing.rust.preventative:
1.
Put on safety glasses.
2.
Coat the rust preventative with a liberal
amount of cleaner/degreaser, then let it
soak for 5–10 minutes.
3.
Wipe off the surfaces. If your cleaner/
degreaser is effective, the rust
preventative will wipe off easily. If you
have a plastic paint scraper, scrape off as
much as you can first, then wipe off the
rest with the rag.
4.
Repeat
Steps.2–3
as necessary until clean,
then coat all unpainted surfaces with a
quality metal protectant to prevent rust.
Avoid. chlorine-based. solvents,. such. as.
acetone. or. brake. parts. cleaner,. that. may.
damage.painted.surfaces..
Machine.Placement
USE.helpers.or.power.lift-
ing.equipment.to.lift.this.
16
1
⁄
2
". Dovetail. Machine..
Otherwise,. serious. per-
sonal.injury.may.occur..
Summary of Contents for Shop Fox W1805
Page 48: ......
