-8-
Model W1805 (For Machines Mfd. Since 7/15)
SA
FE
T
Y
Additional.Safety.for.Dovetail.Machines
USE.this.and.other.machinery.with.caution.
and. respect.. Always. consider. safety. first,.
as. it. applies. to. your. individual. working.
conditions..No.list.of.safety.guidelines.can.
be. complete—every. shop. environment. is.
different..Failure.to.follow.guidelines.could.
result. in. serious. personal. injury,. damage.
to.equipment.or.poor.work.results.
READ.and.understand.this.
entire. instruction. manual.
before.using.this.machine..
Serious. personal. injury.
may. occur. if. safety. and.
operational.information.is.
not. understood. and. fol-
lowed.. DO. NOT. risk. your.
safety.by.not.reading!
GUARD.
The guard helps protect the operator
from the spinning cutter and flying debris
during operation. Never operate the dovetail
machine or allow it to be connected to
power when the guard is removed or serious
personal injury may occur.
BOARD.EJECTION
. The machine may eject
boards in the horizontal position if they are
not clamped securely. Never allow others to
stand directly behind the dovetail machine
during operation or serious injury may occur.
SAFETY.GLASSES.
Even with the guard in
place, occasional chips may be ejected from
the machine. Operator and bystanders MUST
wear ANSI approved safety glasses to prevent
eye injuries.
CUTTER.STARTING.POSITION.
Starting the
machine with the cutter against a workpiece
or fence may eject debris from the machine
and most likely will ruin the workpiece or
cutter. Move the cutter clear of any contact
before starting the machine!
DISCONNECT.POWER.BEFORE.ANY.
ADJUSTMENTS.
This machine requires the
operator to work near the exposed cutter
during setup. Always disconnect power
BEFORE making adjustments to the machine
or serious personal injury may occur.
LOOSE.CUTTER
. Starting the machine with a
loose cutter may eject the cutter from the
machine at a high rate of speed, causing
serious personal injury to the operator or
bystanders. Always double-check that the
cutter is tight after adjusting.
REMOVE.ADJUSTMENT.TOOLS..
Starting the
machine with a wrench left in the spindle
adjustment screw can result in serious
personal injury. Always remove any wrenches
or other adjustment tools from the machine
after adjustments have been made and
before starting the machine.
DUST COLLECTION. Using dust collection when
operating this machine greatly reduces flying
debris and fine airborne dust, which reduces
the risk of personal injury from these
hazards. Always use a dust collection system
when operating this machine.
Summary of Contents for Shop Fox W1805
Page 48: ......
