-23-
Model W1805 (For Machines Mfd. Since 7/15)
O
PE
R
ATIO
NS
4.
Loosen the cap screw on the vertical fence bracket
shown in
Figure.26
.
5.
Align the left-hand edge of the vertical workpiece
with the centerline of the cutter when the tracer
pin is in the "in" or cutting position. This position
will make the first cut in the vertical workpiece half
the width of the cutter.
Figure.27
illustrates this
concept.
Note:
If your workpiece width is not evenly divisible
by the template size, then setting the fences for
even cut distribution is a matter of judging the best
possible position by eye.
6.
Remember the position of the left-hand edge of the
vertical workpiece on the vertical fence scale, and
move the vertical workpiece out of the way.
7.
Align the right-hand edge of the vertical fence with
the same position on the scale from the previous
step, then lock the vertical fence in place with the
cap screw.
8.
Familiarize yourself with the horizontal fence
adjustment components in
Figure.28
.
9.
Loosen both cap screws shown in
Figure.28
.
Cutter Centerline
Aligned
with Edge
Even Cut
Distribution
Vertical
Workpiece
Cutter Centerline
NOT Aligned
with Edge
Vertical
Workpiece
Vertical
Workpiece
Uneven Cut
Distribution
Vertical
Workpiece
Figure.27..
Aligning cutter start location
with the vertical workpiece.
Figure.26..
Vertical fence adjustment cap
screw.
Vertical Fence
Bracket
Cap Screw
Figure.28..
Horizontal fence adjustment
components.
Main Adjustment
Bracket
Micro-Adjust Bracket
Cap Screws
Micro-Adjust Wheel
Continued on next page
Summary of Contents for Shop Fox W1805
Page 48: ......
