Woodstock Shop Fox W1805, Owner'S Manual

Page: 19 / 48

-17-
Model W1805 (For Machines Mfd. Since 7/15)
O
PE
R
ATIO
NS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed incor-
rectly.
The instructions in this section are written with the under-
standing that the operator has the necessary knowledge
and skills to operate this machine.
If.at.any.time.you.are.
experiencing.difficulties.performing.any.operation,.stop.
using.the.machine!
If you are an inexperienced operator, we strongly recom-
mend that you read books, trade articles, or seek training
from an experienced dovetail machine operator before
performing any unfamiliar operations. Above. all,. your.
safety.should.come.first!
Always.wear.safety.glasses.when.oper-
ating.this.machine..Failure.to.comply.
may.result.in.serious.personal.injury.
DO.NOT.investigate.problems.or.adjust.
the.machine.while.it.is.running..Wait.
until. the. machine. is. turned.
OFF
,.
unplugged. and. all. working. parts.
have.come.to.a.complete.stop.before.
proceeding!
READ.and.understand.this.entire.instruc-
tion.manual.before.using.this.machine..
Serious. personal. injury. may. occur. if.
safety.and.operational.information.is.not.
understood. and. followed.. DO. NOT. risk.
your.safety.by.not.reading!
Dovetail.Terminology
Take a moment to review the dovetail terminology shown
in
Figure.12
. These terms will be used throughout this
section and knowing their meaning is important to fully
understand the controls of the machine.
Tail
Pin
Half Pin
Socket
Drawer
Front
Drawer
Side
Figure.12.. Dovetail terminology.