Woodstock Shop Fox W1805, Owner'S Manual

Page: 15 / 48

-13-
Model W1805 (For Machines Mfd. Since 7/15)
SE
TU
P
The Model W1805 is designed to be lifted from two eye
bolts mounted near the top of the machine, on both
sides, using a forklift with lifting straps. The lifting straps
can be connected to the eye bolts with metal shackles.
To.lift.the.Model.W1805.with.a.forklift,.do.these.steps:
1..
Unbolt the base of the dovetail machine from the
shipping pallet ( Figure.4 ), so it can be removed for
placement.
2.
Connect the lifting straps to the eye bolts, using
shackles, as shown in Figure.5 .
3. Lift the machine and place it in your desired
location.
4.
Remove the forklift straps.
Lifting.&.Moving
Figure.4..
Example of where machine is
bolted to the pallet (shows only one side;
machine is also bolted on other side).
Figure.5..
Lifting machine from eyes.
The. Model. W1805. is. a.
heavy. machine.. Serious.
personal.injury.may.occur.
if. safe. moving. meth-
ods. are. not. used.. To. be.
safe,. get. assistance. and.
use. power. equipment. to.
move. the. shipping. crate.
and. remove. the. machine.
from.the.crate..